View 414948-3_8796724.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

176 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors product facts smb offers snap-fit coupling for quick connect/disconnect choice of commercial or high rel connectors 50 and 75 ? mil-type connectors available straight plugs and jacks are completely crimp terminated fast easy cable assembly low vswr standard military, commer- cial or tyco electronics tooling listed under the component program of underwriters laboratories inc., file no. e81956 pc board soldered connec- tors are recognized under the component program of underwriters laboratories inc., file no. e81956 certified by canadian standards association file no. lr 7189 r r r smb connectors are avail- able in commercial and high rel versions. they are ideally suited for circuit miniaturization and are offered in a wide range of configurations including plugs, right-angle plugs, jacks, bulkhead jacks and adapters, as well as printed circuit board and solder jacks. te r mination costs are kept to a minimum using plugs and jacks with a crimp cen- ter contact and hex crimp outer braid. both hand held tooling and pneumatic bench-mounted tooling is available. easily assembled right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. t yco electronics?75 ohm bt 43 smb connectors feature unique spring mating with snap-fit couplings for quick connect/disconnect. these connectors are designed to be intermateable with 75 ohm smb mil-c-39012 connectors. they also fea- ture reliable dual crimp cable terminations. packaging all connectors are packaged individually unless otherwise noted under the ?ilitary no. and/or comments?column in the connector specifications chart. between series adapters for smb between series adapters, please see pages 251-260.
smb connector specifications electrical characteristics impedance ?50 ohms and 75 ohms, nominal frequency range ?0 to 4.0 ghz v oltage rating (vrms) sea level 70,000 feet 50 ohm connectors for rg 178/u series cable 300 75 50 ohm connectors for rg 316/u series cable 400 100 75 ohm connectors for rg 179/u series cable 300 75 75 ohm connectors for rg 195/u series cable 500 125 insulations resistance ?1000 megohms min. contact resistance ?(milliohms max.) after initial environment center contact 6.0 8.0 outer contact 1.0 1.5 braid to body 1.0 n/a contact current rating ?1.5 amps dc max. v oltage standing wave ratio (vswr0 ? to 4.0 ghz or 80% of upper cutoff frequency of the cable, whichever is lower. mating engagement cable straight right-angle rg 178/u series 1.30 + .04f 1.45 + .06f rg 316/u series 1.25 + .04f 1.35 + .04f f=ghz, does not apply to 75 ohm connectors. rf high potential withstanding voltage frequency ?5 mhz leakage current ?n/a 50 ohm connectors for rg 178/u series cable 675 vrms 50 ohm connectors for rg 316/u series cable 950 vrms 75 ohm connectors for rg 179/u series cable 950 vrms 75 ohm connectors for rg 195/u series cable 1225 vrms rf leakage ??5 db min. at 2-3 ghz insertion loss ?.30db max. at 3 ghz mechanical characteristics engagement forces ?14 lbs. [62.3 n] maximum engagement initially. after 500 matings, 14 lbs. [62.3 n] maximum engagement and 2 lbs. [8.8 n] minimum disengagement for all of smbs. cable attachment ? straight connectors ?crimp, both center contact and braid right-angle connectors ?crimp on braid and bifurcated solder center contact durability ?500 cycles per mil-c-39012 contact captivation ?when captivated, the contacts will withstand 4.0 lbs. minimum axial force. cable retention ?when properly assembled to the compatible braided coaxial cable, the retention is equal to the breaking strength of the cable. marking ?per mil-std-130 environmental characteristics t emperature rating ??5? to +165? corrosion (salt spray) ?mil-std-202, method 101, test condition b, 5% salt solution vibration high frequency ?mil-std-202, method 204, test condition b (15 gs) shock ?mil-std-202, method 213, test condition b, 75 gs at 6 milliseconds, 1 2 sine thermal shock ?mil-std-202, method 107, test condition b, except high tem- perature shall be +85?. high temperature shall be +200? for connectors using 200? cables. moisture resistance ?mil-std-202, method 106, when interface gasket is used. no measurements of high humidity. insulation resistance shall be 200 megohms minimum within five minutes after removal from humidity. durability test ?conducted per mil-c-39012 reg. para. 3.15, method para. 4.6.12 materials body, body components and male contacts ?brass, half hard, per qq-b-626, alloy 360, zinc per qq-z-363 female contacts ?beryllium copper per qq-c-530, heat treated per mil-h-7199 insulators ?tfe fluorocarbon per astm d 1710, type 1, grade 1 lockwashers ?phosphor bronze per qq-b-750 crimp ferrule ?annealed copper alloy per ww-t-799 gaskets ?silicone rubber per zz-r-765, class 11b, grade 65-75 plating center contacts ?0.00127 [.000050] min. gold per mil-g-452048 type 1, grade c, class 1, over 0.00254 [.000100] min. nickel per qq-n-290 other metal parts ?gold, nickel or solder plated to meet the finish and corrosion requirements of mil-c-39012 177 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
178 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 50 ohm straight plugs right-angle plugs 6.35 [.250] dia. 6.35 [.250] max. 21.10 [.830] max. 13.21 [.520] max. 13.71 [.540] max. 6.35 [.250] dia. 13.71 [.540] max. 13.21 [.520] max. die cast mil type rg/u center outer other part cable contact contact metal parts dielectric style no. plating plating plating 178, 178a, 178b, 196, 196a gold gold nickel teflon mil type 413985-6 gold gold gold teflon mil type 413985-1 gold gold nickel teflon mil type 413985-3 174, 316, gold nickel nickel teflon mil type 413985-7 188, 188a gold gold nickel teflon die cast 414946-1 gold nickel nickel teflon die cast 5414946-2 179, 179a, 179b, gold gold nickel teflon mil type 1-413985-1 161, 187, 187a, gold gold nickel teflon die cast 5414946-5 belden 9221 gold nickel nickel teflon die cast 5414946-6 gold gold gold teflon mil type 413985-2 rg 316, gold gold nickel teflon mil type 413985-4 188 double braid gold gold nickel teflon die cast 5414946-3 gold nickel nickel teflon mil type 413985-8 rg/u center outer other part cable contact contact metal parts dielectric style no. plating plating plating gold gold gold teflon mil type 414002-7 178, 178a, 178b, gold gold nickel teflon mil type 414002-8 196, 196a gold gold nickel teflon die cast 5414363-8 gold gold gold teflon mil type 414002-1 174, 316, 188, 188a gold gold nickel teflon mil type 414002-3 179, 179a, 179b gold nickel nickel teflon mil type 414002-5 161, 187, 187a gold gold nickel teflon die cast 5414363-3 belden 9221 gold nickel nickel teflon die cast 5414363-5 gold gold gold teflon mil type 414002-2 rg 316, gold gold nickel teflon mil type 414002-4 188 double braid gold gold nickel teflon die cast 5414363-4 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. teflon is a trademark of e.i. dupont de nemours and company.
smb connectors, 50 ohm (continued) straight jacks bulkhead jack adapter (jack-jack) commercial jack die cast brass 5.56 [.219] hex. 5/4.88 dia. [.197/.192] 2.08/2.01 [.082/.079] maximum panel thickness 2.36 [.093] recommended panel cutout f or bulkhead jack and adapter 25.40 [1.000] 6.35 [.250] hex. 17.53 [.690] max. rg/u center body jack cable contact plating dielectric style part no. plating 178, 178a, 178b, 196, 196a gold nickel teflon mil type 5414170-2 174, 316, gold nickel teflon mil type 5414170-1 188, 188a gold nickel teflon die cast 414948-1 rd 316, 188 double braid gold nickel teflon commercial 414948-3 center t ype contact body dielectric style part no. plating plating gold nickel teflon mil type 228553-1 jack-to-jack gold gold teflon mil type 228553-2 mil type jack bulkhead jacks 6.35 [.250 ] hex. 28.60 [1.120] center bulkhead rg/u contact body jack. cable plating plating dielectric style part no. 174, 316, gold nickel teflon commercial 5415006-1 188,188a gold nickel teflon commercial 5228217-1 rd 316, 188 double braid gold nickel teflon commercial 5415006-2 179 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
180 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 50 ohm (continued) pc board v ertical jacks pc board v ertical plugs a b jacks center body dim. dim. part t ype contact dielectric style plating plating a b no. 7.62 3.94 gold gold .300 .155 teflon mil type 413990-1 7.62 3.94 gold nickel .300 .155 teflon mil type 413990-2 10.16 2.54 teflon mil type 414612-2 gold nickel .400 .100 gold tin 3.94 8.25 teflon brass, 5221111-1 .155 .325 max. stamped plugs center body dim. dim. recommended part t ype contact dielectric pc board style plating plating a b layout no. low profile (plug) gold nickel 3.94 7.62 teflon b mil type 415774-1 mated pair .155 300 a b recommended pc board layout 2.54 [.100] 5.08 [.200] 5.08 [.200] 1.60 [.063] 4 plcs. 1.19 [.047] 0.97 0.03 [.038 .001 ] 11.53 0.20 [.454 .008 ] 3.94 0.13 [.155 .005 ] 6.35 [.250] 6.32 [.249] 0.64 [.025] 1.02 0.05 [.040 .002 ] 5.08 0.05 [.200 .002 ] 1.42 [.056] typ. 6.35 [.250] sq. typ. recommended pc board layout 1.60 [.063] 1.19 [.047] 5.08 [.200] 2.54 [.100] 4 plcs. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
smb connectors, 50 ohm (continued) 13.46 [.530] dia. 6.35 [.250] a b plugs center interface pcb dim. dim. recommended part contact body leg dielectric style pc board plating plating plating ab layout no. 8.76 2.79 gold nickel nickel teflon .345 .110 die cast b 415380-1* 8.76 3.94 gold nickel tin teflon .345 .155 die cast a 5414338-1 * 5 leg design recommended pc board layouts 5.08 [.200] 2.54 [.100] 5.08 [.200] 1.24 dia. [.049] min. 1.75 dia. [.069] min. (4 holes) a b 1.24 0.05 [.049 .002 ] 2.54 [.100] 5.08 [.200] 5.08 [.200] 1.75 [.069] 4 plcs. c 2.54 [.100] 5.08 [.200] 5.08 [.200] 1.32 [.052] 5 plcs. 12.70 [.500] a b a b 13.46 [.530] jack with standoff pads jack low profile jacks center interface pcb dim. dim. recommended part t ype contact body leg dielectric style pc board plating plating plating ab layout no. 7.11 3.94 gold gold gold teflon .280 .155 mil type a 413996-2 low profile 7.11 3.94 gold nickel nickel teflon .280 .155 mil type a 413996-4 7.11 2.79 gold gold gold teflon .280 .110 die cast a 415340-1 8.76 2.79 gold gold gold teflon .345 .110 die cast a 415672-1 8.51 3.94 gold gold gold teflon .335 .155 mil type a 414026-2 8.76 3.94 gold nickel nickel teflon .345 .155 mil type a 414026-3 with 8.76 3.94 standoff pads gold nickel tin-lead teflon .345 .155 die cast a 5414337-1 8.76 2.79 gold nickel nickel teflon .345 .110 die cast b 5415379-1* 8.51 3.94 gold nickel nickel teflon .335 .155 die cast a 415381-1 7.67 2.79 bulkhead gold gold gold teflon .302 .110 die cast a 414963-1 9.78 3.94 brass, commercial gold nickel tin polypropylene .385 .155 stamped c 5228435-1 7.67 2.79 bulkhead gold gold gold teflon .302 .110 die cast a 1274330-1 * 5 leg design pc board, right-angle jacks a b 19.87 [.782] bulkhead jack pc board, right-angle plug 181 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
182 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 50 ohm (continued) 5/4.88 [.197/.192] dia. 2.08/2.01 [.082/.079] maximum panel thickness 2.36 [.093] recommended panel cutout bulkhead pc board jack, solder receptacle kits smb receptacle jack center body kit t ype contact dielectric style part plating plating no. front mount gold nickel teflon mil type 228216-1* rear mount gold nickel teflon mil type 228215-1* *includes jam nut and lockwasher center body t ype contact dielectric style part no. plating plating front mount gold nickel teflon mil type 414895-1 lockwasher and jam nut part no. 415001-2 part no. 414969-2 kit includes lockwasher and jam nut 6.35 [.250] 3.71 [.146] 16.0 [.630] max. hex. 3.68 [.145] 6.99 [.275] dia. 0.97 0.13 [.038 .001 ] dia. ref. plane hex 10-32 unef-2a 4.45 [.175] 3.18 [.125] 2.92 [.115] 1.02 [.040] 3.45 [.136] 6.35 [.250] note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. teflon is a trademark of e.i. dupont de nemours and company.
smb connectors, mini 75 ohm product facts industry standard for minia- ture 75 ohm smb smb offers snap-fit coupling for quick connect/disconnect suitable for high density applications fast easy cable assembly low vswr connectors offer consistent mating and unmating forces straight plugs and jacks are completely crimp termi- nated low cost mini 75 ohm smb connec- tors are ideally suited for circuit miniaturization in communication, broadband and switching equipment as well as a variety of other applications. they offer the same low consistent mating/unmating force as tyco electronics standard smb products and therefore, outer contact r esistance values are main- tained from connector to connector. standard military, commer- cial or tyco electronics tool- ing can be used to terminate these products. cost effective assembly of the straight plugs is com- pleted with a crimp center contact and hex crimp on the outer braid. right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. electrical characteristics impedance ?75 ohms frequency range ?0 to 4.0 ghz insulation resistance ?1000 megohms contact current rating ?1.5 amps dc max. mechanical characteristics engagement forces initial?4.0 lbs. [62.3 n] maximum engagement. after 500 matings, 14.0 lbs. [62.3 n] maximum engagement. durability?00 cycles environmental characteristics t emperature rating ?-65? to +165? 183 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors
184 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, mini 75 ohm (continued) rg cable center contact outer contact body part no. plating plating plating 179, 187 gold nickel nickel 5415484-1 179, 187 gold gold nickel 5415484-2 rd 179 gold gold nickel 5415484-3 rg cable center contact outer contact body part no. plating plating plating 179, 187 gold gold nickel 5415487-1 179, 187 gold nickel nickel 5415487-2 rd 179 gold nickel nickel 5415487-3 rg cable center contact body part no. plating plating 179, 187 gold nickel 415500-1 6.35 [.250] 1.73 [.068] 2.64 [.104] 17.78 [.700] ref. 9.78 0.25 [.385 .010 ] 13.7 [.539] max. 16.0 [.630] ref. 6.35 [.250] 10.21 [.402] ref. 22.86 [.900] max. 6.35 [.250] hex. 10.92 [.430] 9.7 [0.38] 3.66 0.05 [.144 .002 ] 4.52 [.178] 5.03 [.198] recommended pc board layout straight plug right-angle plug bulkhead jack note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
smb connectors, mini 75 ohm (continued) leg center contact body part no. length plating plating 2.11 .083 gold gold flash 415504-2 3.05 .120 gold gold 415504-3 3.05 .120 gold gold flash 415504-4 leg center contact body part no. length plating plating 2.79 .110 gold gold 415490-1 2.79 .110 gold nickel 415490-2 2.11 .083 gold gold 415490-3 2.11 .083 gold nickel 415490-4 leg center contact body part no. length plating plating 2.79 .110 gold nickel 415377-1 2.79 .110 gold gold 415377-2 2.79 .110 gold gold 415377-5 * *isolated. v ertical pc board jacks 7.62 0.18 [.300 .007 ] 3.67 [.145] max. 5.08 0.08 [.200 .003 ] 5.08 0.08 [.200 .003 ] 0.71 0.08 [.028 .003 ] 1.32 0.08 [.052 .003 ] 4 plcs. 2.54 0.08 [.100 .003 ] recommended pc board layout 7.95 0.25 [.313 .010 ] 5.54 [.218] 3.18 [.125] 3.71 [.146] max. 14.1 [.555] 5.08 0.08 [.200 .003 ] 5.08 0.08 [.200 .003 ] 0.71 0.08 [.028 .003 ] 1.32 0.08 [.052 .003 ] 4 plcs. 2.54 0.08 [.100 .003 ] recommended pc board layout 4.50 [.177] 3.71 [.146] 2.79 [.110] 19.94 [.785] 2.36 [.093] panel thickness max. max. 11.18 [.440] 5.08 0.08 [.200 .003 ] 5.08 0.08 [.200 .003 ] 0.71 0.08 [.028 .003 ] 1.32 0.08 [.052 .003 ] 4 plcs. 2.54 0.08 [.100 .003 ] recommended pc board layout right-angle pc board jacks right-angle pc board bulkhead jacks 185 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
186 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 75 ohm bt 43 (smz) product facts widely used in data transmission and telecom- munication applications bt 43 connector developed from the smb range and feature snap-on and latch ing variant most bt 43 connectors are available as fully crimped connectors. bt 43 and 75 ? connectors available in solder and crimp versions the tyco electronics range of 75 ohm smb (smz) connectors are designed to meet the increasing demands of the t elecommunications market, and are designed in accordance with bs9210 f0022. specifications max working voltage (dc) ?500 v max proof voltage (dc) ?1.5 kv contact resistance (inner) ? 5 milliohm contact resistance (outer) ? 1 milliohm bodies and other parts ?brass female center contacts ? copper alloy male center contacts ? copper alloy outer contacts ?becu plating contacts and critical surfaces ?gold other parts ?nickel insulators ?p.t.f.e.
smb connectors, 75 ohm bt 43 (smz) (continued) cable type t ermination method body plating part no. inner outer rg 179b/u crimp crimp selective gold 1311097-1 bt2002 crimp crimp selective gold 1311098-1 straight plugs, snap-on 30.5 [1.20] 28.0 [1.10] 20.4 [0.80] 8.8 [0.35] assembled dia. straight plugs, latching, crimp/crimp 9.6 [0.38] 27.8 [1.09] 29.9 [1.18] assembly dia. cable type body plating part no rg 179b/u selective gold 1311099-1 bt2003 selective gold 1311100-1 bt2002 selective gold 1311101-1 bt2001 selective gold 1311696-1 bt3002, tzc75024 selective gold 1311102-1 rg 59b/u, selective gold 1313507-1 rg 140/u, urm90 187 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
188 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 75 ohm bt 43 (smz) (continued) right-angle socket, latching, solder/crimp 23.0 [0.91] 21.0 [0.83] 16.3 [0.64] 9.9 [0.39] ref. ref. ref. ref. cable type body plating part no rg 179b/u selective gold 1311106-1 bt2003 selective gold 1311698-1 bt3002, tzc75024 selective gold 1311111-1 rg 59b/u, rg 140/u selective gold 1313508-1 straight free plug, crimp/crimp 8.82 [0.35] 30.4 [1.20] assembled 20.2 [0.80] 5.60 [0.22] dia. cable type body plating part no rg 179b/u selective gold 1408041-1 right-angle socket, snap-on, solder/crimp 17.93 [0.71] 21.67 [0.85] 16.86 [0.66] max. 10.16 [0.40] max. max. max. cable type body plating part no rg 179b/u selective gold 1311103-1 bt3002, tzc75024 selective gold 1311104-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
smb connectors, 75 ohm bt 43 (smz) (continued) straight bulkhead plug 30.8 [1.21] assembled max panel 28.5 [1.12] 10.8 [0.43] 5.6 [0.22] 7.5 [0.30] 8.4 [0.33] dia. 3.0 [0.12] mounting detail cable type t ermination method body plating part no. inner outer rg 179b/u crimp crimp selective gold 1311120-1 bt500b, bt2003, crimp crimp selective gold 1311701-1 bt2003a bt3002, tzc75024 crimp crimp selective gold 1311122-1 right-angle bulkhead plug, solder/crimp 20.4 [0.80] 21.5 [0.85] ref. 16.7 [0.66] ref. 10.1 [0.40] ref. cable type body plating part no rg 179b/u selective gold 1311115-1 7.50 [0.30] 8.00 [0.31] a/f 32.1 [1.26] assembled length 10.75 0.05 [0.42 .002 ] 9.50 0.10 [0.37 .004 ] panel cut out dia. cable type t ermination method body plating part no. inner outer 3m: 043, 031c, crimp crimp selective gold 1313511-1 cs4456, gore: gcx 189 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
pc board plug 43/1d 6.20 [0.24] 0.90 [0.04] 11.4 [0.45] 3.80 [0.15] 5.08 [0.20] 5.08 [0.20] mounting detail 1.20 [0.05] dia. 1 hole dia. dia. dia. 4 holes 1.70 [0.07] body plating part no. selective gold 1311125-1 pc board plug 43/1e 13.2 [0.52] 5.08 [0.20] 5.08 [0.20] 1.20 [0.047] dia. 1 hole dia. 4 holes 1.70 [0.067] 9.5 [0.37] 6.5 [0.26] sq. 15.0 [0.59] mounting detail body plating part no. selective gold 1314103-1 190 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connectors, 75 ohm bt 43 (smz) (continued) ddf plug, crimp/crimp 30.4 [1.20] assembled 27.9 [1.10] 10.3 [0.41] dia. cable type body plating part no rg 179b/u selective gold 1327083-1 bt2003 selective gold 1311117-1 bt2002 selective gold 1311700-1 b2001 selective gold 1313883-1 bt3002, tzc75024 selective gold 1311118-1 rg 59b/u, rg 140/u, selective gold 1313887-1 urm90 ddf plug, crimp/crimp cable type body plating part no rd179, 124431 (filotex), 1366 (orebro), k02253d-1, selective gold 1314422-1 k02253-2 (shuner) 27.8 [1.09] ref. ref. 7.54 [0.30] right-angle pc board plug 22.14 [.872] mounting detail panel cutout detail 5.08 [.200] 5.08 [.200] 2.54 [.100] 2.54 [.100] 14.00 [.551] 8.21 [.323] 5/16-32 unef min. 4 holes 3/8 across flats 6.22 [.245] 1.70 [.067] min. 1.20 [.047] 2.90 0.10 [.114 .004 ] 8.35 0.10 [.329 .004 ] pa rt no. 1314102-1 note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
smb connectors, 75 ohm bt 43 (smz) (continued) t ester 430a 37.4 [1.47] 11.1 [0.44] dia. 8.8 [0.35] dia. extraction tool 65a 100.0 [3.94] 10.0 [0.39] dia. body plating part no. selective plating 6-1311703-1 straight adapter plug-plug 17.0 [0.67] 8.7 [0.34] a/f 2.2 [0.09] max. panel 17.1 [0.67] 7.5 [0.30] 8.0 [0.31] 11.0 [0.43] dia. dia. mounting detail body plating part no. selective gold 1313364-1 selective gold 1311127-1 pa rt no. 1313364-1 part no. 1311127-1 part no. 1311164-1 191 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors note: pa rt numbers are rohs compliant except: indicates non-rohs compliant.
192 catalog 1307191 dimensions are in millimeters dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 3-07 and inches unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 rf coax connectors smb connector crimp tooling * daniels manufacturing corporation 6103 anno avenue orlando, florida 32809 note: equivalent military tool part numbers m22520/5-01 ?daniels hand tool hx4 m22520/5-33 ?daniels die set y136 m22520/5-37 ?daniels die set y138 m22520/5-41 ?daniels die set y140 m22520/5-03 ?daniels die set y196 m22520/2-01 ?daniels hand tool afm8 t elephone: 407-855-6161 f ax: 407-855-6884 50 ? /75 ? commercial connector tooling mil type connector tooling center contact crimp tooling braid crimp tooling center contact crimp tooling braid crimp tooling dies for mil-c- dies for mil-c- dies for rg/u t yco electronics 22520/2-01 tyco electronics 22520/5-01 daniels* daniels* selector t yco electronics daniels hex die cable pro-crimper t ool pro-crimper t ool hand positioner position pro-crimper hand across hand tool daniels* position hand tool daniels* hex tool number hand tool t ool flats number positioner number position crimp die number position 178, 178a, female-k699 female-k699 2.67 178b, 196, 58489-1 4 58489-1 a&b y624 afm8 4 58483-1 a hx4-1637 196a male-k727 male-k727 .105 double braid afm8 female-k699 4 58483-1 b hx4-1637 3.25 178, 196 male-k727 .128 174, 316 58489-1 female-k699 4 58489-1 a y444 afm8 female-k699 4 58483-1 b hx4-1637 3.25 188, 188a male-k727 male-k727 .128 double braid y196 3.84 174, 316, 58489-1 female-k699 4 58489-1 c afm8 female-k699 4 58483-1 c hx4-1637 188 location a .151 double braid y196 3.25 174, 316, 58489-1 male-k727 4 58489-1 c afm8 solder 58483-1 b hx4-1637 188 location a .128 179, 179a 179b, 161, 58489-1 female-k699 4 58489-1 a y444 afm8 female-k699 4 58483-1 b hx4-1637 3.25 187, 187a, .128 belden 9221 179, 179a 179b, 161, 58489-1 male-k727 4 58489-1 a y444 solder 58483-1 b hx4-1637 3.25 187, 187a, .128 belden 9221 180, 180a solder 58483-1 c hx4-1637 3.84 180b .151 mini smb 75 ohm 179, 187 female-k699 58483-1 b hx4-1637 solder 179, 187 center 58483-1 b hx4-1637 contact note: all 75 ohm smb connectors have a solder center contact. note: pa rt numbers are rohs compliant except: indicates non-rohs compliant. belden is a trademark of belden wire and cable company. daniels is a trademark of daniels manufacturing corporation.

▲Up To Search▲

Price & Availability of 414948-3

	To Download 414948-3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .